Phone & Data Cords, Plugs, Wire

2-wire modular DSL modem fax cord 6P2C RJ11
$2.49
pc103
6P2C modular fax, copier, or DSL modem cord.
Two conductor, 26AWG, gray jacket.
Dark gray 6P2C plugs with gold plated pins.
Wired for standard single line applications.
These are typically required for use with fax machines, copiers, DSL modems, and satellite systems, to eliminate interference caused by other adjacent lines that slow down your data speed. It only has the center 2 wires instead of the normal 4 wires.
Use the shortest length possible for best results. 25 feet is max length.

SELECT LENGTH

Quantity

4-wire modular telephone cord 6P4C RJ11/14
$1.56
pc110
Custom made modular telephone cord.
Four conductor 26AWG, UL listed.
Standard 6P4C plugs with gold plated pins.
Wired for voice or data applications (select below, voice is default).
Available in 4 colors. (Interior decorators and designers like these cords because there is no colored writing on the cords, only the plain color of the cord itself.)

SELECT LENGTH, COLOR, and WIRING

Quantity

6P4C spade to modular telephone cord
$5.56
pc117
Custom made spade lug to modular telephone cord.
Four conductor 26AWG, UL listed.
Standard 6P4C plugs with gold plated pins on one end, and nickle plated spade lugs on the other.
It will be stripped back 3 inches on the spade end unless you specify differently (put a note on the checkout page).
These make great replacement cords for old 4-prong phones, if it has screw terminals inside.
Available in 4 colors. (Interior decorators and designers like these cords because there is no colored writing on the cords, only the plain color of the cord itself.)

SELECT LENGTH AND COLOR

Quantity

10 pc Scotchlok UR2 3-port phone wire splice connectors
$3.49
pa120
3M Scotchlok model UR2 3-port splice buttons for telephone wiring.
Each button can splice 2 or 3 wires.
Fits 19 to 26 AWG solid wire.
Has sealant inside for a water-tight splice.
These are perfect for adding a line to existing wiring. You'll need about 6 inches or more of slack on the existing wire. Simply cut the line and strip back about an inchor two of the outer jacket. No need to strip the wires themselves! Put the ends all the way into the connector and crimp the button closed with pliers. Make sure to squeeze it down evenly and completely.
Sold in packs of 10.

Quantity